Blog 7 min read

Which three bones meet at the elbow, the joints they form and the landmarks you can feel

Which three bones meet at the elbow, the joints they form and the landmarks you can feel

The bones of the elbow are the lower end of the humerus and the upper ends of the ulna and the radius, which meet in three joints that share one capsule.

This guide shows which part of each bone takes part, which surfaces touch, how the three joints divide the work, what the carrying angle is and which landmarks you can find on your own arm, with a table of the parts and one of the joints.

What bones make up the elbow

Three bones meet at the elbow, but only one end of each. The OpenStax chapter on the bones of the upper limb, hosted by LibreTexts, describes the distal end of the humerus as having two articular areas that join the ulna and the radius to form the elbow joint. So the cast is:

  • Humerus: its lower, flattened end, with the trochlea and the capitulum.
  • Ulna: its upper end, the medial bone of the forearm, with the olecranon and the trochlear notch.
  • Radius: its upper end, the lateral bone of the forearm, with the disc-shaped head.

The arm and elbow chapter of O'Rahilly's Basic Human Anatomy, published by Dartmouth, places the joint 2 or 3 cm below the epicondyles of the humerus. That detail matters when you palpate: the bumps you feel on each side sit above the joint line, not on it.

The words around the elbow come from the same root. O'Rahilly traces "cubital" to the Latin cubitus, elbow or forearm, and our atlas notes that "ulna" also meant elbow or forearm in Latin. For the whole limb, from the humerus down to the fingers, see our guide to the bones of the arm.

Which bones form the elbow joint and which parts touch

Each bone brings its own set of named parts to the elbow. This table pairs each part with what it meets:

BoneParts at the elbowWhat they meet
HumerusTrochlea, medially; capitulum, laterallyThe trochlea takes the ulna; the capitulum takes the head of the radius
UlnaTrochlear notch with the olecranon above and the coronoid process below; radial notch on the lateral sideThe trochlear notch grips the trochlea; the radial notch holds the rim of the radial head
RadiusHead, with a shallow depression on top and a smooth rim around itThe depression meets the capitulum; the rim turns in the radial notch of the ulna

Two pairs of surfaces carry the hinge, and the third pair lets the forearm rotate. LibreTexts compares the upper end of the ulna to a crescent wrench, because its C-shaped trochlear notch wraps around the pulley-shaped trochlea. The radius meets the humerus more simply: the small depression on top of its head articulates with the knob-like capitulum.

Do not pair the radial head with the trochlea. The trochlea belongs to the ulna and the capitulum to the radius, and a simple check is that both lateral structures, the capitulum and the radius, sit on the thumb side.

Three joints inside one capsule

The elbow is usually called one joint, yet three articulations share its cavity. O'Rahilly describes the humeroradial and humero-ulnar parts as continuous with each other, sharing a common cavity with the proximal radio-ulnar joint:

JointSurfaces that meetWhat it allows
Humero-ulnarTrochlea of the humerus and trochlear notch of the ulnaFlexion and extension, the hinge movement
HumeroradialCapitulum of the humerus and the upper surface of the radial headMoves with the hinge in flexion and extension
Proximal radio-ulnarRim of the radial head and the radial notch of the ulnaPronation and supination, as the radial head turns

O'Rahilly stresses that the elbow itself is a hinge, so its movement is limited to flexion and extension. Turning the palm up or down happens at the radio-ulnar joints. The radial head is held against the ulna by the strong anular ligament, which attaches to the front and back margins of the radial notch, and it rotates inside that ring.

The capsule is weak in front and behind and is strengthened on each side. The radial collateral ligament fans out from the lateral epicondyle to the anular ligament, and the ulnar collateral ligament runs from the medial epicondyle to the coronoid process and the olecranon.

The elbow end of the humerus

LibreTexts notes that the humerus becomes flattened as it reaches the elbow. Its two articular areas sit side by side:

  • Trochlea: the medial, spindle- or pulley-shaped surface for the ulna. The name means pulley.
  • Capitulum: the lateral, knob-like surface on the front of the bone, for the radius. The name means small head.

Above them are three hollows that receive the forearm bones at the ends of their range. In front, the coronoid fossa takes the coronoid process of the ulna and the radial fossa takes the head of the radius when the elbow is fully bent. Behind, the larger olecranon fossa takes the olecranon when the elbow is fully straight.

On each side stands an epicondyle. The medial one is much larger, because the powerful grasping muscles of the front of the forearm arise from it. The lateral epicondyle is smaller and gives rise to the weaker muscles of the back of the forearm, and above it runs the lateral supracondylar ridge.

Behind the medial epicondyle runs the ulnar nerve. O'Rahilly identifies this contact point as the "funny bone," so the sharp tingle from a knock there comes from a nerve pressed against bone.

The elbow and forearm bones at their upper ends

The ulna dominates the elbow. Its upper end has four parts to name:

  • Olecranon: the posterior and superior part that forms the bony tip of the elbow. Our atlas adds that the triceps inserts on it, and that its name means head of the elbow in Greek.
  • Trochlear notch: the large C-shaped surface that grips the trochlea.
  • Coronoid process: the prominent lip at the lower margin of the notch, with the roughened ulnar tuberosity just below it on the front.
  • Radial notch: a small, smooth area on the lateral side, slightly below the trochlear notch, for the head of the radius.

The radius turns at the elbow. Its disc-shaped head sits on the capitulum and turns in the radial notch. Below the head is the narrow neck, and below that, on the medial side, the radial tuberosity, which O'Rahilly and our atlas both give as the insertion of the biceps.

Our article on radius vs ulna follows both bones down to the wrist. For every feature of the ulna with its joints, see the ulna page in our Bone Atlas.

The carrying angle and why the forearm angles out

With the elbow straight and the palm facing forward, the arm and forearm do not form a straight line. LibreTexts gives the deviation as 5 to 15 degrees, with the forearm angled laterally away from the arm. This is the carrying angle.

Its function, according to the same chapter, is to let the forearm and hand swing freely or carry an object without hitting the hip. The angle is larger in females, to accommodate their wider pelvis.

O'Rahilly gives the bony reason: the shape of the medial part of the trochlea makes the supinated forearm angle out from the arm during extension. That is why you see it with the elbow straight and the palm forward.

Landmarks to feel at your own elbow

Three points can be found on yourself in under a minute. Bend your elbow and feel the point at the back: that is the olecranon of the ulna. Then run your fingers to each side. The prominent bump on the inner side is the medial epicondyle, and the smaller one on the outer side is the lateral epicondyle, both palpable landmarks according to our atlas.

Now straighten the arm. The olecranon slides into the olecranon fossa at the back of the humerus. With the palm forward, look down your arm to see the carrying angle.

To test yourself on a skeleton, name the three bones, then point to the trochlea, the capitulum, the trochlear notch, the radial notch and the radial head, saying what each one meets. When you review from photos, Osteo+ names a bone from a picture, so you can check a loose ulna or radius before moving on.

Frequently asked questions

What three bones make up the elbow?

The humerus, the ulna and the radius. Only their ends take part: the lower end of the humerus and the upper ends of the two forearm bones.

Is the elbow a hinge joint?

Yes. The humero-ulnar and humeroradial parts work as a hinge for flexion and extension, while the proximal radio-ulnar joint inside the same capsule lets the radial head turn for pronation and supination.

What is the pointy bone of the elbow called?

It is the olecranon, the upper end of the ulna. It forms the bony tip of the elbow and receives the triceps.

What is the funny bone?

It is not a bone. It is the ulnar nerve where it passes behind the medial epicondyle of the humerus, which is why a knock there produces a sharp tingle.

What is the carrying angle of the elbow?

It is the lateral angle of 5 to 15 degrees between the arm and the forearm when the elbow is straight and the palm faces forward. It is larger in females.

Scan your first bone for free.

Download the app and identify a bone in the next 30 seconds.